Page 810 - IGUS ECS CATALOG

®
CFCLEAN e-skin fl at with CFCLEAN | Advantages
Revolutionise effectiveness of the entire plant

Almost no wear and abrasion:
IPA cleanroom Class 1

Low restoring forces: due to highly
fl exible stranded structures

Thinner:
approx. 16% smaller diameter 1)
by dispensing with outer jacket

Lighter:
up to 21% weight reduction 1)

Easy and time-saving maintenance:
change a cable in a few seconds, even
with readily harnessed connectors
Cost-eff ective:
no new ribbon cable required, if a
new cable is to be added

Sustainable:
no waste in case of replacement, as the entire
system does not need to be replaced
+ = No bending of the system due

to stiff jacket cables
1) Compared to commercially available jacketed cables

Powerful combination for your cleanroom -

®
e-skin fl at with chainfl ex CFCLEAN
®
®
The CFCLEAN product family has been specially developed and tested for use in e-skin fl at. The following
goals were pursued during development: Very high fl exibility with low restoring forces of maximum weight and
diameter reduction. The high degree of fl exibility was achieved by particularly fi ne stranded special conductors
in a particularly soft and bend-resistant design. The low restoring forces with weight reduction were realised by
dispensing with an outer jacket, the shielded stranded structures being guided by low-adhesion, particularly
abrasion-resistant and highly banding based on PTFE with very high fl exural strength.
From stock, available from 1m
● Guarantee: 20 million double strokes, up to 36 months
● Certifi ed for use in cleanrooms
● With UL AWM certifi cation
● All standard core/cross section combinations available

Typical industries and applications
● Flat Panel Display (FPD) industry ● Semiconductor production ● Production of OLEDs ● Medical technology
● Microelectronics industry
808 More information at www.igus-asean.com/CFCLEAN

05.06.23 18:53
12)-ASEAN-CLEAN-E-SKIN-E6-1-2022.indd 808
12)-ASEAN-CLEAN-E-SKIN-E6-1-2022.indd 808 05.06.23 18:53