Page 1132 - IGUS ECS CATALOG
P. 1132
e-spool | Technical data | Guidelines
®
Technical data
Max. speed ≤ 1m/s
Maximum acceleration ≤ 1m/s 2
®
Permitted temperature °C - e-spool standard 0°C / +70°C
Permitted temperature °C - e-spool HD 0°C / +80°C
®
Maximum fi ll weight, vertical ≤ 1kg/m
Guidelines for e-spool ®
®
®
®
In view of the special mechanical stress inside an e-spool , we recommend using igus chainfl ex
cables. We also recommend that the following guidelines are observed:
1. Only put cables side by side in the linear chain - never stack them!
2. Where possible, chainfl ex cables with a TPE outer jacket should be used for unshielded cables
®
3. Shielded cables should be chosen from the chainfl ex CFROBOT range
®
4. The maximum bend radius of the twisterband must be accounted for
5. Where possible, use separators to protect cables against cross-over and abrasion against each other. To
make the best possible use of the interior space, install the separator in alternate links
6. Insert cables sorted by diameter and/or bend radius - insert small ones in the centre then increasingly
larger ones towards the outside
7. Apply strain relief to both ends of the cable - when using a cable tie for strain relief, please ensure the head
of the cable tie is underneath to avoid cable damage
8. The cables should be installed in the twisterband with clearance space both outwards and inwards from
the rotary axis
Installation instructions
For applications that move horizontally, a smooth surface is required for the e-chain to travel over.
®
1130 More information www.igus-asean.com/e-spool
16)-ASEAN-SPECIAL-SOLUTIONS-2022.indd 1130 05.06.23 19:04
05.06.23 19:04
16)-ASEAN-SPECIAL-SOLUTIONS-2022.indd 1130