Page 682 - MiSUMi FA Mechanical Components Economy Series
P. 682
Economy Series
Floating Joints Product Overview
YV 6WDQGDUG 7\SH Linear MISUMI Economy
Economy series 6DYLQJ Guide series
Floating Joints
8S WR
14 Floating Joints ᵖᵎ Housing Units
Fittings / Tubes / Suction Cups / Valves Compact Cylinder
More space-saving
One-Touch Fittings Ensure strength
P.627 2 Compact Design
MISUMI
Miniature Fitting/ Miniature Swivel Joint standard product 17 Compact Design 13 Connection Length Shortened24 % Economy series
MISUMI
P.650 18 42 14 34 Mounting Area Reduced 38 %
Speed Controllers
P.655
Tubes / Suction Cups
P.659
Customer Problem MISUMI Economy series Compact Design
Vacuum Generators The holder is too large and does not match the moved object, resulting The mounting surface of the holder is reduced, and * Take M5 specification
in insufficient space, while trying to shorten the connection length.
the connection length is also shortened to save space.
as an example
P.665 2Ensure strength by test 2Hard chrome-plated surface treatment with excellent abrasion
· The tensile machine connected to the floating joint applies a vertical resistance, ensuring anti-rust and abrasion resistant performance
Solenoid Valves upward force to the holder mounted on the table until the holder is 2MISUMI Economy series uses hard chromium plating surface
damaged, and the applied load and deformation curve are recorded.
2 Diagram of Tensile Test 2 Tensile Test - Load and Displacement Curve Graph treatment, and its rust prevention performance is equivalent
to existing products with nitriding treatment.
P.669 9000 Holder groove damaged
Hand Switching Valves Vertical 8000 Nitriding Treatment Hard Chrome Plated Blackening
8.4kN
MISUMI Economy series Generic products in the market
MISUMI standard product
7000
Upward
6000
Load
P.674 Load [N] 5000 Hardness 500HV~ Hardness 750HV~
4000
Abrasion Nitriding Depth Plating Thickness No Hardness
3000 Resistance Approx. 10~30ȝm Approx. 3ȝm
Floating
O Rings Joint 1000 1 ( ˚
2000
Holder 0 0 0.5 1 1.5 2
P.677 * M5 specification floating joint for test Deformation Displacement [mm] Anti-Rust
Performance
Themaximumoutputforceofthethincylinderisabout
Floating Joints Destructive load:8.4kN 0.4kN * (Salt Water Spray)
After 8H
Ensureadequatestrength
* Refer to the value of MISUMI thin cylinderП25
at 1Mpa working pressure for output force. ( ( ˚
* Problems of generic products in the market
P.679
679