Page 645 - IGUS Bearing
P. 645

®
                     ®
 iglidur    iglidur  guide rings | Advantages  iglidur  guide rings | Product range                        iglidur
 ®
                                                                                                                ®
 guide rings                                                                                             guide rings
 Easy and cost-effective: iglidur  guide rings  iglidur  J guide rings, from stock
                 ®
 ®
                                                    R max. 0.2
         iglidur  J is our all-round material when it comes to an outstanding running performance and low
                   R max. 0.2
                ®
 iglidur  guide rings  coefficient of friction on the broadest range of shafts. The flexibility of iglidur  J enables the typical
 ®
                                                                                         ®
 Easy installation  assembly expected with guide rings using the push over/clip on method. Good media resistance
 Some things can actually be very easy: replace   rounds off the range of properties.
                  R max. 0.1
                                      dH
 complex stamped PTFE strips with a single clip-  dG  dS  dG  R max. 0.1
 Cost-effective  on ring, for example in cylinders, control valves   bG  bG  Order key
 and fittings. In addition to the standard iglidur  J
 ®
 range, it is also possible to configure your required          Type        Dimensions [mm]
 More wear-resistant    guide ring from the entire iglidur  bearing range.
 ®
 than PTFE strips
 When to use it?
 ●  When guide rings with excellent wear   d2  T   b  2  d1      iglidur ®  material
 Higher load capacity  properties are required                       Guide ring   Outer Ø  Slot angle  Slot width

 ●  When simple assembly is of great importance                          Metric  Inner Ø            Length
 ●  When high edge loads occur  R max. 0.2                                                                         R max. 0.2
 ®R max. 0.2
 ●  When tailor-made solutions based on iglidur    b1                             R max. 0.2
 Maintenance-free  materials are required


 R max. 0.1                                                                     R max. 0.1
 dG  dS    dH  dG                                                dG  dS                              dH  dG
 bG                    bG     R max. 0.1                                    bG                                   bG     R max. 0.1
 When not to use it?  Installation recommendation for piston   Installation recommendation for housing
 ●  When the guide rings should also act as a
 seal     Dimensions       dG          dH          bG           Dimensions       dS          dG          bG

 ●  When different diameters should be covered   [mm]  (h tolerance)  (H tolerance)  [mm]  (h tolerance)  (H tolerance)
 by one part  Nominal size  dG = d1  dH = d2  bG = b1 +0.2      Nominal size   dS = d1    dG = d2   bG = b1 +0.2

          Dimensions [mm]

          d1 d2     b1    b2   T  Part No.                      d1 d2     b1    b2   T  Part No.
           T        h13  ±0.5  [°]                                        h13  ±0.5  [°]             T
 d2       6    8     6  b  2  1.0 d1  0  JPRM-0608-00-010-060 167)  40 44  d2  5.4  2.5  20 JPRM-4044-20-025-054  b  2  d1
          8   10    10    1.0  0  JPRM-0810-00-010-100  167)    45 50     5.4   2.5  20 JPRM-4550-20-025-054
          10 12     5.4   2.5  20 JPRM-1012-20-025-054          45 50     10    2.0  0  JPRM-4550-00-020-100  167)
          12 14   b1 5.4  2.5  20 JPRM-1214-20-025-054          50 55     5.4   2.5  20 JPRM-5055-20-025-054
                                                                                                            b1
 Alternative solutions:  13 15  5.4  2.5  20 JPRM-1315-20-025-054  50 55  10    2.0  0  JPRM-5055-00-020-100  167)
          14 16     5.4   2.5  20 JPRM-1416-20-025-054          58 63 9.5 (–0.22) 2.5  25 JPRM-5863-25-025-095
          14 16     10    1.0  20 JPRM-1416-20-010-100          60 65     5.4   2.5  20 JPRM-6065-20-025-054
          16 18     5.4   2.5  20 JPRM-1618-20-025-054          70 75     5.4   2.5  20 JPRM-7075-20-025-054
 1  2  3  4  5  17 22  5.4  2.5  25 JPRM-1722-25-025-054              More Information about iglidur  material
                                                                                               ®
                    5.4
                          2.5
                              20 JPRM-2023-20-025-054
          20 23
          25 28     5.4   2.5  20 JPRM-2528-20-025-054                and technical data
                                                                           ®
                                                                      iglidur  J u Page 163
 ®
 With iglidur :  28 32  10  1.0  20 JPRM-2832-20-010-100
          28 32     20    1.0  20 JPRM-2832-20-010-200                Max.   +90°C
          28 33     5.4   2.5  25 JPRM-2833-25-025-054                min.   -50°C
          30 34     5.4   2.5  20 JPRM-3034-20-025-054                Ø 6 - 70mm
 1  2     35 39     5.4   2.5  20 JPRM-3539-20-025-054                More dimensions upon request
 ASEAN 09/2023  ASEAN 09/2023  167)  Straight slot                    Available from stock
                          2.5
                    5.4
          35 40
                              25 JPRM-3540-25-025-054
                                                                      Detailed information about delivery time online.
 642 Online tools and more information u www.igus-asean.com/guide-rings      3D CAD files, prices and delivery time online u www.igus-asean.com/guide-rings  643
   640   641   642   643   644   645   646   647   648   649   650