Page 850 - IGUS Bearing
P. 850
iglidur iglidur
®
®
®
®
®
®
tribo iglidur tribofilament | Processing and accessories iglidur tribofilament | Processing and accessories tribo
3D printing 3D printing
®
Processing instructions Complete processing instructions online igus print bed film for your print bed
iglidur tribofilaments can be processed on any 3D printer (in the download area of the respective Thanks to the film available from igus for the print bed,
®
®
®
that is equipped with a heated print bed on which material) there is very good adhesion between the iglidur tribofilament
®
®
temperatures are adjustable. The igus adhesive film allows u www.igus-asean.com/tribofilament and the print bed.
®
a good adhesion between the iglidur tribofilament and ● Useable up to approximately 20 times
®
®
the print bed. ● "Set" the degree of adhesion by means of print bed
● Good ventilation should be provided during processing temperature
● When heated above +300°C, hazardous fumes are ● 3D printer without heating bed? The combination
produced of iglidur I150 with this print bed film also makes it
®
®
®
● For iglidur A350 and iglidur RW370, a high- possible to make wear-resistant parts oneself with
temperature printer is necessary such 3D printers
Example: Part No. tribofilaments ® Part No. Adhesive film for the print bed
I150-PF-0175-0750 PF-01-0203-0203 (203 x 203mm)
for 750g spool with a diameter of 1.75mm made PF-01-0254-0228 (254 x 228mm)
of the iglidur material i150
®
New: igus bonding agent for tribofilament ® Spool
®
The igus bonding agent for iglidur tribofilaments ensures iglidur tribofilaments weighing up to 750g are wound onto a
®
®
®
®
®
reliable adhesion of the component to the print bed but spool. Larger dimensions are available upon request.
also easy removal after printing. The bonding agent
(powered by Magigoo) was developed as a simple solution Filament thickness
specifically for iglidur tribofilaments to improve the The iglidur tribofilaments are available with 1.75mm and
®
®
®
®
adhesion of these filaments to various printing plates. It is 3mm thickness. The 3mm filaments can be used without
easy to apply and can be removed at any time with warm problems in 3D printers that need a 2.85mm filament.
water without leaving any residue.
®
®
®
● Ideal for tribofilaments iglidur i150, iglidur i180 and
iglidur i180-BL Test kits
®
● Good adhesion of the parts on the print bed for 25g of filament, loose with 1.75mm diameter
®
● Easy detachment made of the iglidur material i150
Part No. Bonding agent for tribofilaments ®
PF-ADHESIVE-01
ASEAN 09/2023 ASEAN 09/2023
848 More information u www.igus-asean.com/tribofilament Prices and delivery time online u www.igus-asean.com/tribofilament 849