Page 9 - Bosch Modernisation of Boiler Systems

Modernisation of boiler systems | 9

Reduced operational costs and increased reliability by automation. Minimising mandatory
supervision thanks to automation equipment (EN 12953) ...

... with continuous measurement of conductance
Measuring the conductance in the boiler makes it
possible to significantly reduce desalting losses.
Combined with automatic desalting less fresh water
has to be heated and pre-treated.

... with automatic desalting and blow-down
Automatic blow-down and desalting increase conveni-
ence of operation while reducing fuel and water
consumption. High levels of automation also prevent
manual errors and therefore increase the operating
safety and service life of the system.

... with automatic condensate monitoring
The contamination of the condensate, for example
with fat, can cause critical damage to the boiler and
system. In case of contamination, the automatic
monitoring system triggers an alarm and blocks the
inflow of the condensate. The boiler system is opera- The times when it was necessary to have a constant presence
ted without interruption by substituting the conden- in the boiler house have long since gone.
sate with make-up water.

Maximum availability of the system ...

... through remote service ... through remote monitoring
On the customer’s demand a Bosch service expert can An immediate message on a cell phone in the case of a
gain direct access to the system via a secure connec- fault makes it possible to react immediately – so that
tion to identify e.g. false parameters quickly. In some operation remains interruption-free.
cases these faults can be eliminated remotely or the
service technician is able to avoid a second visit by
providing the correct spare part at the first on-site visit.

... through preventive condition monitoring
The intelligent boiler control evaluates sensor signals
during operation to detect wear or the need of mainte-
nance at an early stage. These notifications enable higher
reliability of the system and trouble-free operation.

... through automatic functions that reduce wear on
materials
Frequent cold starts at high load levels create stress
for boilers and their components. Automatic boiler 99 % of all boiler damages are due to inadequate maintenance.
Monitoring and early-detection functions give security.
start functions and control algorithms for reducing
burner starts increase the service life of the system.