Page 49 - IGUS Linear

drylin linear technology | Product selection drylin linear technology | Technical data rails/profiles/shafts
®
®
Properties Aluminium profiles
Installation Lubrication-free Dimensionally Profile Shafts Square Single Complete Hybrid Aluminium, extruded section according to EN AW 6061/6060
sizes and quiet interchangeable with rails profiles pillow carriage roller Shafts and rail profiles Surfaces
operation recirculating ball bearings block bearing
drylin W, drylin T 155) , drylin R, drylin Q hard-anodised, bare surface
®
®
®
®
drylin W 5 drylin N, profile with CA marking clear-anodised, bare surface
®
®
®
drylin N 4 drylin N, profile with AR marking black-anodised (anti-reflect), bare surface
®
155) Exception: TS-11-20 clear-anodised
®
drylin Q 3
drylin T 4 Profile straightness tolerances
®
Shafts AWMP/AWMR DIN 754-3; 2mm/m, local 0.6mm/300mm
®
drylin T mini 4 DIN EN 12020-2
drylin R 12 Total length up to 1,000mm; Straightness 0.7mm
®
Profile rails AWMU/AWMQ, WS/NS/TS Total length up to 2,000mm; Straightness 1.3mm
Special features Total length up to 3,000mm; Straightness 1.8mm
Loads For robust Resistant Compact, Particularly Torque- Torsionally Unsupported
> 100kg requirements to dirt space-saving light weight resistant stable installation Total length up to 4,000mm; Straightness 2.2mm
For linear guide systems in conjunction with igus plain bearings made of iglidur materials, we recommend drylin
®
®
®
drylin W
®
aluminium guide shafts AWMP. The mentioned tolerance specification (h8) refers to the interaction of the components
drylin N to a bearing and provides information on the basic bearing clearance. Due to the manufacturing process, aluminium
®
shafts have areas with diameter fluctuations above the nominal dimension in the µm range, which are not critical
drylin Q
®
for use within a linear plain bearing. For use as a piston rod, dowel pin or ball bearings, we recommend SWM steel
drylin T or EWM stainless steel shafts with tolerance h6.
®
drylin T mini
®
®
Length tolerances of the profiles cut-to-length by igus [mm]
drylin R Length <400 >400-1,000 >1,000-2,000 >2,000-4,000
®
Technical options Permissible variations of the standard saw ±0.5 ±0.8 ±1.2 ±2.0
Manual adjustable Automatic Automatic Floating Manual with with with length according to DIN ISO 2768-m
bearing clearance adjustable bearing pre-load bearing clamp measuring lead screw toothed belt
clearance function system drive drive
Minimum rail profile saw lengths [mm]
drylin W drylin W Hole spacing Without holes
®
®
drylin N C4 = 60 162) C4 = 120 162)
®
Rail profiles WS, WSQ, WSX 100 160 100
drylin Q drylin N C4 = 60 162) C4 = 150 162)
®
®
drylin T Size 17/27 (miniature) NS, NS-AR, NSV, NSV-AR 100 – 70
®
Size 40/80 NS, NS-AR 100 200 100
drylin T mini drylin T C4 = 15/20/25/40 C4 = 60 162) C4 = 80 162) C4 = 120 162)
®
®
drylin R Installation size 04 (miniature) TS-04 70 – – – 70
®
Installation size 01/11 TS-01/TS-11 – 100 120 160 100
Application areas
®
162) L min: C5 min + C4 + C6 min; saw length examples: drylin WS-20 rail: C5 min = 20 min; C4 = 120mm; C6 = 20mm;
Stainless steel Temperatures Chemical- FDA-compliant Cleanroom Door/control Camera 3D-print
components above +90°C resistant and ESD panel slider components 20mm + 120mm + 20mm = 160mm (min. saw lengths). Lengths less than the minimum saw length upon request
adjustments
Minimum shaft/square shaft saw lengths [mm]
®
drylin W
drylin R Hole spacing
®
drylin N Shafts AWMP/AWMR 100
®
drylin Q T1 = 75 163) T1 = 100 163) T1 = 120 163) T1 = 150 163) T1 = 200 163)
®
Supported shaft AWMU 115 140 160 190 240
drylin T drylin Q
®
®
drylin T mini Square profile AWMQ 100
®
drylin R 163) L min: C5 min + T1 + C6 min; saw length examples: AWMU-20 supported shaft: C5 min = 20mm;
®
T1 = 100mm; C6 min = 20mm; 20mm + 100mm + 20mm = 140mm (min. saw length)
suitable particularly suitable ASEAN 09/2023 ASEAN 09/2023 Lengths less than the minimum saw length upon request
46 Online tools and more information u www.igus-asean.com 3D CAD files, prices and delivery time online u www.igus-asean.com 47