Page 889 - ASEAN Chainflex Catalogue 2023

chainfix strain relief | Parameters | Overview chainfix strain relief | Parameters | Overview

igus chainfix
®
strain relief

CFX - clamps Tiewrap plates - CFU.V - with CFN nuggets Strain relief CFV - CFB -
bolted, clip-on innovative separators strain relief element strain relief
honeycomb design connector system

Recommended E4, E6, for all KMA* easy chain , E2/000, E2.48, 3400/3500, For all KMA* with C-profile E2/000, E2 e-tubes, E2/000, R2.1, E4, E6, for all KMA*
®
standard for with C-profile E2 e-tubes, E4, E6 3450/3480, R68, R167/168, or top-hat (DIN) rail 35 E6, T3 E4.1L, E4.1 with C-profile
the following *Polymer metal mounting bracket R2.48, E4.48L/R4.48L, *Polymer metal mounting bracket *Polymer metal mounting bracket
e-chains : E4.42/H4.42/R4.42,
®
E61.52, E6.52/R6.52

When to use S t a n d a r d f o r h i g h Standard for many CFU.V strain relief with Cost-effective, fast strain relief Combination of separator For both in e-chains and Space-saving, modular
®
this strain relief? accelerations, loads and applications at medium innovative honeycomb design for simple application with and strain relief, ideal for small e-tubes. Stepped strain relief strain relief with many
demanding applications. For and low accelerations. For for fast assembly and high small spaces and medium spaces. For applications with for use outside of the e-chain cables in confined spaces.
®
many cables, large cable unsupported, gliding, hanging holding force. Openable from accelerations. Also available medium accelerations. For cross section - even with For applications with high
diameters and stacked and standing applications both sides. Easy positioning as individual parts for fixed small cable diameters. Ideal different connectors. Easy accelerations and loads, e.g.
cables. For long travels, in general machinery and of cables for a variable applications, such as in for e-tubes. For machine tools to retrofit. Simple installation in machine tools.
cranes, offshore, machine machine tools. Also available filling. Cables with different cabinets, etc. and automation. into top-hat rail 15 (TS92.31)
tools, high speeds and as an individual part, for diameters can be strain- or C-profile on KMA mounting
hydraulic cables. example in control cabinets. relieved easily in one layer. brackets.
Different attachment options
in front of the e-chain , strain
®
relief can be screwed in from
above and below.

When not No limitation For large cable diameters For high loads and large For high loads For high loads For high loads No limitation
to use it? cable diameters

Properties

Assembly time index + + + + + + – + + + + –
Adjustable tensile strength + + – + – – – +
Price index
Modularity yes yes yes yes yes yes yes (special fabrication)
Dynamics high to very high high medium high high medium high to very high

Price index +++ = best suitability
low price category + = good suitability
medium price category + – = suitable
highest price category – = limited suitability

EU2023 EU2023
882 More information www.igus-asean.com/chainfix 3D-CAD, configurators, service life calculation and more www.igus-asean.com/chainfix 883